MicroStamp11 is the smallest commercially available 68HC11 module in the world! And it is more powerful and cost-effective than some of the popular DIP modules out there. Add to that the plethora of available 68HC11 literature, examples, and tools, and MicroStamp11 presents a very attractive package. Whether you prefer Assembler, BASIC, or C, there are many free or low-cost tools available to help you perfect your application.
|
|
|
|
|
|
Overview
The MCU runs in expanded mode, and external EEPROM and interface circuitry is included on-board. A modest quantity of I/O pins, and powerful on-chip hardware subsytems make this a great product for many applications.
Features:
- tiny 1-inch x 1.4-inch stamp-sized board (25.4x 35.6mm)
- thin board material (0.031-inch or 0.79 mm)
- light weight: only 0.2 oz. (5.7 grams)
- surface-mount chips for low-profile, high-density design
- features 68HC11D0 microcontroller
- available with 8K or 32K EEPROM
- EEPROM has hardware Write Protect (software write protect also possible)
- 192 bytes on-chip RAM (+32K external SRAM on MAX version)
- all PORT A lines available (pulse accumulator, input captures, output compares)
- all six PORT D lines available (any mix of: general purpose I/O, SPI, or SCI)
- 5V low-dropout regulator
- low-voltage inhibit reset circuit
- all available port lines/interrupts/reset brought out to versatile 20-pin header
- convenient switches for RUN/LOAD and WRITE PROTECT (EEPROM)
- programmable in Assembler, BASIC, C
- easy s-record loading via Docking Module, using MicroLoad (Windows program, included with Starter Package)
- compatible with BASIC11 Compiler/Simulator/Debugger/Terminal IDE for Windows
- modular design, with versatile connector options offers many configuration possibilities (breadboard, ribbon cable, stackable, planar, etc.)
- many accessories available
- get a Starter Package first-- then buy as many additional modules as you need for all your application